You have no items in your shopping cart.
REFURBISHED products are Like-New and Factory Sealed by DJI and include the standard DJI Warranty, Parts, and Packaging. Every DJI Refurbished item is 'QUALITY GUARANTEED' and thoroughly tested by DJI experts. Refurbished products undergo a professional refurbishing process, by DJI, that brings them up to the Same High-Standards as Brand New Products.
Capture 4K video and take 12-megapixel still photos from the air with the DJI Inspire 1 v2.0 Quadcopter with Integrated Camera and 3-Axis Gimbal. Forgoing the fixed landing gear design found on many earlier quadcopters, the Inspire 1 features a retractable arm system whereby the underside of each prop motor has a foot to act as a landing pod when the arms are lowered. In-flight, the arms lift up to provide the camera an unobstructed 360-degree view. A 3-axis gimbal keeps shots steady and the camera pointed the same direction as the quadcopter banks and turns. The camera records internally to microSDHC/SDXC memory cards (16GB included) and can also beam a live 720p feed to a mobile device running the DJI Lightbridge app or a monitor or FPV glasses with an HDMI input. One transmitter (radio controller) is included and a second can be added so that one operator can pilot and another can pan and tilt the camera.
As with many other multi-rotor systems, the Inspire 1 relies on a GPS-based stabilization system that – thanks to spatial awareness – is able to hold a position even when experiencing wind interference, can compensate for overzealous pilot inputs to help avoid stalling, automatically brings the aircraft home in the event of signal loss or at the press of a button, and makes possible a number of semi-automated flight modes that can be enabled through the app. There is also an "indoor" mode which relies on Vision Positioning technology – essentially a special camera – provide stability indoors or in other contexts where GPS is unavailable (Note: certain features will be unavailable in indoor mode).
This bundle includes the Inspire 1 along with gimbal and camera, a transmitter, a flight battery, a battery charger, and a tablet holder that mounts on the transmitter. To store and transport the aircraft, a case with fitted cut-outs is included. It holds the Inspire with rotors detached, one or two transmitters, props, spare flight batteries, and more.
Imagine holding the future in your hands. Designed to be powerful while lightweight, flexible while providing the stability you need, the Inspire 1 is DJI’s most advanced complete package. All of the latest aerial technology is packed into one simple, ready-to-fly system, putting you in the sky within minutes.
Carbon fiber arms give you the strength to maneuver in the air and they transform, moving out of the camera’s way at the flick of a switch. With a full 360⁰ unobstructed view, you now have the freedom to capture shots independent of the direction you are flying. Every part, every component of the Inspire 1 was engineered to be durable and lightweight. The body’s aerodynamic design cuts through the sky and further enhances your control over the aircraft. This ensures long flight times and a long operational life.
Get crystal clear images with DJI’s most advanced camera to date. The gimbal holding your camera is the result of DJI’s years of expertise in camera stabilization, giving you smooth, stable footage in any flight conditions.
A beautiful, 720p HD view shows you exactly what your camera sees at all times. Frame your shots and fly as though you‘re in the sky yourself. This is made possible by an all new and improved version of DJI’s Lightbridge technology which can transmit video from up to 2km away.
Take absolute control of your Inspire 1 with DJI’s most sophisticated remote controller to date. Featuring dedicated buttons for photo and video capture, a gimbal control dial, an integrated rechargeable battery and more, it’s easy and intuitive to fly. The controller has an mini-HDMI and USB port allowing you to connect mobile devices or compatible screens.
For an even greater level of precision, use a second remote controller and fly with a friend. With two operators controlling the same Inspire 1, one person pilots the flight path while the other aims the gimbal and camera. Each user can have their own screen to see exactly what is being shot in real-time. By working in tandem, you’re capturing shots that are more complex and artistic than ever before.
A fully integrated intelligent battery powers your Inspire 1 and virtually manages itself. When in flight, your remaining battery power is shown live, letting you know how long you can continue to fly. Advanced algorithms calculate the distance of your aircraft and estimated time to return home, letting you know when it’s time to fly back. The battery reports the voltage of each cell, the total lifetime charges and discharges, and the overall health and battery status. All this helps you keep your Inspire 1 in the air and flying for years to come.
Indoor flight has always been a true test of skill for all levels of pilots. DJI’s new Vision Positioning technology uses a specially designed camera as well as sonic waves to bring simplicity to flying indoors. This technology allows the Inspire to hold its position, stop when the controls are released, and respond to your commands even when GPS is unavailable.
All of these features combine to put your Inspire 1 on autopilot when needed. If the battery runs low or connection with your remote controller is lost, the Inspire 1 uses its positioning system and smart flight technology to return back to you.
All of DJI’s flight system knowledge has been put into the remote’s software, giving you smooth, stable flight. Finely tuned control algorithms make you feel like you’re riding in the cockpit, with a level of control no other multirotor on the market can match.
The two remote controllers are physically identical. You can set the remote controllers to either "Master" or "Slave" through the DJI GO app if you wish to use dual controller mode.
Yes.
Its length x height x width dimensions without the propellers attached are 44 x 30 x 45cm (17.3 x 11.8 x 17.7in).
The Inspire 1 uses its own new flight controller.
The Inspire 1 uses 3510H motors and 1345T propellers.
The Inspire 1 comes with a 16GB micro-SD card. It supports SD cards up to 64GB.
The Inspire 1 does not currently support GoPro attachments. The gimbal is designed to hold DJI cameras only.
The exposure can be set to Auto, for automatic changes, or Manual, if you wish to use a specific setting.
We do not recommend flying with any payload other than the included DJI gimbal and camera.
Yes, you can preview image or video sizes through the DJI GO app.
No, DJI does not sell LCD or HD monitors for the Inspire 1. However, you can output the live streaming video to a compatible monitor or mobile device of your own.
Yes, all Inspire 1 units come with standard TB47 charger.
With the standard TB47 100W charger, it takes 85min to fully charge a 4500mAh battery.
No, it cannot. The mobile device holder can only be used with the Inspire 1 remote.
There is no trainer port on the remote controller for the Inspire 1.
The Inspire 1 does not currently support ground station.
The two remote controllers are physically identical. You can set the remote controllers to either "Master" or "Slave" through the DJI GO app if you wish to use dual controller mode.
Yes.
Its length x height x width dimensions without the propellers attached are 44 x 30 x 45cm (17.3 x 11.8 x 17.7in).
The Inspire 1 uses its own new flight controller.
The Inspire 1 uses 3510H motors and 1345T propellers.
The Inspire 1 comes with a 16GB micro-SD card. It supports SD cards up to 64GB.
The Inspire 1 does not currently support GoPro attachments. The gimbal is designed to hold DJI cameras only.
The exposure can be set to Auto, for automatic changes, or Manual, if you wish to use a specific setting.
We do not recommend flying with any payload other than the included DJI gimbal and camera.
Yes, you can preview image or video sizes through the DJI GO app.
No, DJI does not sell LCD or HD monitors for the Inspire 1. However, you can output the live streaming video to a compatible monitor or mobile device of your own.
Yes, all Inspire 1 units come with standard TB47 charger.
With the standard TB47 100W charger, it takes 85min to fully charge a 4500mAh battery.
No, it cannot. The mobile device holder can only be used with the Inspire 1 remote.
There is no trainer port on the remote controller for the Inspire 1.
The Inspire 1 does not currently support ground station.
| Manufacturer | Website | Customer Service Phone | Warranty Policy |
| DJI Innovations | www.dji.com | (818) 235-0789 | Warranty Policy |
| Autel Drones | www.auteldrones.com | (844)-692-8835 | Warranty Policy |
| Parrot | www.parrot.com | (877) 972-7768 | Warranty Policy |
| PolarPro | www.polarprofilters.com | (949) 220-9395 | Warranty Policy |
| Ryze Tech | www.ryzerobotics.com | (310) 616-5299 | Warranty Policy |
| FLIR Systems | www.flir.com | (800) 254-0630 | Warranty Policy |
| Lume Cube | www.lumecube.com | (858) 352-6067 | Warranty Policy |
| GoProfessional Cases (GPC) | www.goprofessionalcases.com | (858) 467-7903 | Warranty Policy |
| Epson America | www.epson.com | (800) 463-7766 | Warranty Policy |
| Freefly | www.freeflysystems.com | (425) 485-5500 | Warranty Policy |
| GDU | http://www.gdu-tech.com | (512) 518-3719 | Warranty Policy |
| Hoodman USA | www.hoodmanusa.com | (800) 818-3946 | Warranty Policy |
| HPRC | www.hprcusa.com | (800) 229-7146 | Warranty Policy |
| MicaSense | www.micasense.com | (206) 279-9972 | Warranty Policy |
| Sentera | www.sentera.com | (844) 736-8372 | Warranty Policy |
| Slantrange | www.slantrange.com | (858) 412-4323 | Warranty Policy |
| Pix4D | www.pix4d.com | (415) 766-0503 | Warranty Policy |
| Olympus | www.getolympus.com | (800) 622-6372 | Warranty Policy |
| ZeroTech | www.zerotech.com | +86 10 5778-4912 | Warranty Policy |
| PowerVision | www.powervision.me | (855) 562-6699 | Warranty Policy |
